Hand Held Halo Serial OBDI Datalogger


	HAND HELD HALO SERIAL/USB* PC OBDI DATALOGGING KIT (Cable + Software) WITH USB* & PDA OPTIONS (Ref. Optional Extra's Section Below)
		VERSION 3.x! MITSUBISHI 3000GT, GTO, DODGE STEALTH, DSM (TALON/LASER/ECLIPSE), EVO, GALANT, LANCER & CSM (COLT/SUMMIT/MIRAGE) OBD1 PC DIAGNOSTIC DATA LOGGING KIT
	INTRODUCTION:	This kit further improves upon our already established market leading Datalogging Kits by offering a cost effective and flexible options based approach to buying exactly what you need for the job. The powerful standard kit costs Only £42.99 and includes everything you need with our Market Leading Hand Held Halo OBDI Datalogger™ PC Software v3.x (ref. spec below) and one of our high quality 2-part Serial Datalogging Cables. If you need USB connectivity, Auto On/Off (ABS ON) or you'd like to log data using your compatible PDA simply add the cost of the option to the standard kit price of £39.99. This is without question the most flexible and feature rich OBDI Datalogging solution currently available for the 3000GT/GTO, DSM, CSM, Lancer, EVO and Galant. For cable only solutions, OBDII Kits and our NEW Hybrid OBDII Datalogging Kits (1994-1999 3000GT/DSM/EVO) please checkout our other products or website for free demos, forums and other great offers! www.handheldhalo-datalogging.co.uk

	KIT CONTENTS:	HAND HELD HALO SERIAL OBDI DATALOGGER SOFTWARE™ v3.x UNIQUE 2-PART SERIAL OBDI DATALOGGING CABLE [~ For USB connectivity add Option 1 at checkout] FIXING KIT FAULT CODE GUIDES & GLOSSARY OF TERMS FITTING INSTRUCTIONS & TUTORIALS 12-MONTH RTB LIMITED WARRANTY FREE SUPPORT & FORUM MEMBERSHIP FREE UPDATES & DISCOUNTS ON UPGRADES

	INCLUDES FREE MEMBERSHIP TO OUR NEW FORUM:

	NEW USER DEFINABLE DIAL SETS AND GAUGES!!!

		When datalogging most OBDI vehicles the act of connecting the car to a PC/PDA with a datalogging cable will put the cars ECU into diagnostic mode. A side effect of the car going into diagnostic mode is the fact that the ABS is disabled. To re-enable using one of our high quality 2-part cables, simply disconnect and then reconnect the inline connector. However, if you are looking for the ultimate in True Auto On/Off capability with ABS enabled in software please upgrade to our v2.x Datalogging Cable as detailed in the 'Option 2' below.

	OPTIONAL EXTRAS (NOT INCLUDED AS STANDARD): If you would like any of these Optional Extras, please add their cost to the standard kit price at checkout.
	OPTION 1 MITSUBISHI/DSM BAUD RATE COMPATIBLE USB-TO-SERIAL ADAPTER FOR USE WITH A USB PC. PLEASE ADD IN STORE £21.99
	--------------------------------------------------------------------
	OPTION 2 UPGRADE TO OUR v2.x AUTO ON/OFF SERIAL DATALOGGING CABLE TO RE-ENABLE ABS IN SOFTWARE. PLEASE ADD IN STORE £12.00
	--------------------------------------------------------------------
	OPTION 3 A PC-PDA SERIAL ADAPTER FOR USE WITH A COMPATIBLE PDA. PDA NOT INCLUDED! NOT COMPATIBLE WITH OPTION 2! (click here for compatible PDA's) PLEASE ADD IN STORE £7.50

	WORKS WITH:	* 1990-93 MKI Mitsubishi 3000GT/GTO or Dodge Stealth * 1990-94 Eagle Talon, Mitsubishi Eclipse, or Plymouth Laser * 1991-92 Galant VR-4 * 1993 Mitsubishi Lancer GTI 16v * 1989-92 Colt, Summit & Mirage (CSM) * 1992-95 Mitsubishi Evo I, II & III* (12-PIN OBDI ONLY) Many 1990-1995 Mitsubishi vehicles fitted with a 12-PIN OBDI diagnostic port (please check port compatibility before buying)

	TRY OUR SOFTWARE DEMO:	Demo won't download? Click here

	SUPPLIER'S OF DATALOGGING PRODUCTS FOR OVER 4 YEARS! COMPARE PRODUCTS, PRICE, PERFORMANCE & BUY WITH CONFIDENCE! FREE DEMO SOFTWARE, FREE FORUM, FREE UPDATES, FREE SUPPORT! * * * * * * * * * * * * * THE BEST PRODUCTS & SERVICE AT THE BEST PRICE * * * * * * * * * * * * * THE HYBRID IS HERE! WE ALSO SUPPLY SOFTWARE, CABLES AND KITS FOR ALL OTHER MITSUBISHI/DSM/CSM VEHICLES: 1994-1996: USA 3000GT/Dodge Stealth/DSM/CSM/EVO - HYBRID OBDII KIT 1997-1999: USA 3000GT/Dodge Stealth/DSM/CSM/EVO - ISO:9141-2 OBDII KIT 1994-1999: EUROPEAN/JAPANESE 3000GT/GTO/EVO - HYBRID OBDII KIT 1990-1993: ALL 3000GT/GTO/DSM/CSM/EVO - OBDI KIT SEE OUR OTHER PRODUCT LISTINGS FOR MORE DETAILS www.handheldhalo-datalogging.co.uk

	YOU NEED:	> A compatible car with a 12-PIN OBDI port (ref. below) > PC/Laptop with a serial com port or USB* [For USB PC's, add the Approved USB Adapter Option 1* above] > Operating System - Windows 98/ME/2000/XP/VISTA/7 (not x64 bit) > CD-ROM - 2x Speed or higher > Processor - Pentium P300 or higher > System Memory - 128MB or greater > Hard Disk - 20MB Free Space > VGA Graphics Card - 4MB or greater

	OBDI LOCATION:
	OBDI APPEARANCE:

	FEATURES LIST:
		FAULT CODE DISPLAY: Perhaps the most immediate and informative feature of the software is the Fault Code Reader which reads and clears Engine ECU Fault Codes (click image left). A full text description is provided alongside the fault code to allow you to easily cross reference with our user friendly Fault Code Reference Guide (a pdf chart included in the kit) as well the Manufacturers Service & Repair Manual (not included please ref. our other auctions).
		USER DEFINABLE SENSORS: Up to 12 completely user definable extra sensors add yet more functionality and control to the most user-friendly and powerful OBDI software package on the planet! Redefine EGR to WBO2 or modify Timing Advance. You can even redefine Upper and Lower Limits when graphing any sensor (click image left)
		NEW TO VERSION 3! FULLY CUSTOMISABLE (SKINNABLE) DIAL SETS AND GAUGES WITH USER DEFINABLE VISUAL AND AUDIBLE ALARMS (click image left for more info?).
		NUMERIC DASHBOARD: Fully customisable numeric dashboard showing real-time values and peak high/low. Quick, intuitive and simple to use! (click image left)
		OPTION 2 AUTO ON/OFF - ABS ON: Disabling of the ABS is an expected side effect of entering diagnostic mode. It is possible to stop this with fairly primitive & unreliable hardware switching. Through our seamless software integration of the auto on/off feature their is no longer any requirement for user intervention. With the Hand Held Halo Datalogger™ v2.x or greater and a v2 Cable ABS is always ON! (an upgrade to a v2 cable is available as 'Option 2' above)
		PREMIER FEATURE COMPARE SESSION FEATURE: Log your cars data, save it as a "session" and then exchange the "session" with other 3000GT/GTO owners on our forums or via email. They can then load your session into their copy of the Hand Held Halo Datalogger™ and time-shift the graphs to match a particular ECU parameter such as Engine Speed (click image left). All other displayed sensors will then show their values at this matched point to enable you to make an immediate and visible comparative analysis of your cars relative performance.
		RPM COUNTER: To support the accurate capturing of logged data we have included a bright clear rev counter (click image left). Simply start logging hold the revs in the green for 30 seconds, save the session and exchange, compare and contrast with other owners or a specialist import garage who's running our software.
		SELECTING SENSORS: There are a number of ways to select and graph sensors all of them as easy as clicking a right mouse button (click image left).
		USER DEFINABLE PROFILES: Sensor options such as graph colour and data refresh rate are easily definable using simple drop down menu's. This feature allows you to group sensors by colour and save your preferences as a "Profile" for future use (click image left).
		SENSOR MONITOR: Display all sensor values numerically or select and graph just the one's you're working on (click image left)!

	Hand Held Halo OBDI Datalogger™ Core Specification; [ Factory scan tool emulation] * Display and clear the CHECK ENGINE error codes * Sensor display * Air flow sensor * Throttle position sensor * RPM * Injector Duty Cycle * Battery/system voltage * Coolant temperature * Barometer * O2 Sensor * Idle speed control position * Exhaust Gas Re-circulation temperature * Turn on/off actuators * Injectors * Fuel pump relay * Purge solenoid * Fuel pressure solenoid [ Datalogging] * Can log all of the above factory data plus much more - for example... * Fuel trims * Knock sensor [Additional Features] * 12x additional user-definable sensor locations e.g WB02 * Customisable Dial Sets and Gauges with Visual & Audible Alarms * Auto On/Off - ABS is not disabled * Graphical overlay for car-to-car performance and tuning comparison * On screen RPM Counter to help with accurate data capture at specified revs * Numeric Dashboard * Real-time calculation and graphing of the Injector Duty Cycle * User definable sensor profiles i.e colour, data refresh rate * Easily create, exchange and compare 'session' files with other users via email and forums [Diagnostic Port] * Any Mitsubishi manufactured vehicle with a similar OBDI diagnostic plug. Some of the more advanced data may not be available, but the Datalogger will be able to do anything the factory scan tool can. * ECU Compatibility * No ECU modifications necessary * Works with any stock factory ECU * Also works with HKS's VPC or EFI's PMS. Some sensor values may not reflect their true values since both of these units "fool" the factory ECU into behaving a certain way by modifying some of the true sensor values.

	Important Notice For reasons of security Hand Held Halo Datalogging™ reserves the right to decline and refund any payment for software and/or kits containing software if the information provided at checkout cannot be verified e.g unconfirmed addresses and P.O Box numbers. We apologise for any inconvenience this may cause, but to avoid cancellation of your order and disappointment please supply an address that can be Verified and maintain communication with us at all times!

	VISIT OUR ONLINE STORE FOR MORE AUTOMOTIVE DIAGNOSTIC SOLUTIONS!
	© All rights reserved. Designated trademarks and logos are the property of their respective owners.